# Sonoff mini zrbs

**URL:** <https://forum.cpha.pt/t/sonoff-mini-zrbs/15541>\
**Category:** Configuração\
**Created:** [28 Dezembro , 2025 20:09 UTC](https://forum.cpha.pt/t/sonoff-mini-zrbs/15541 "2025-12-28T20:09:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![the\_shadow](https://forum.cpha.pt/user_avatar/forum.cpha.pt/the_shadow/32/8068_2.png) [@the\_shadow](https://forum.cpha.pt/u/the_shadow)\
**Post date:** [28 Dezembro , 2025 20:09 UTC](https://forum.cpha.pt/t/sonoff-mini-zrbs/15541/1 "2025-12-28T20:09:46Z")

</div>

Bom dia povo, comprei sonoff mini zrbs e integrei com zigbee ( conbeeII) mas nao consigo calibrar o motor… alguem sabe como fazer? Obrigado

---

<div class="post-metadata">

**Author:** ![mapb\_1990](https://forum.cpha.pt/user_avatar/forum.cpha.pt/mapb_1990/32/17426_2.png) [@mapb\_1990](https://forum.cpha.pt/u/mapb_1990)\
**Post date:** [1 Janeiro , 2026 00:01 UTC](https://forum.cpha.pt/t/sonoff-mini-zrbs/15541/2 "2026-01-01T00:01:03Z")

</div>

tens que carregar no botão durante 10seg e depois voltar a carregar. ele vais começar a abrir e fechar algumas vezes e quando parar, ja está.

> The user can perform the calibration operation using the device button. If there is any  
> deviation in the calibration result, the calibration can be repeated until the desired  
> accuracy is achieved.  
> ① Press and hold the device button for more than 10 seconds until the LED indicator  
> enters breathing mode. Then, briefly press the device button to enter “Manual Calibration”  
> mode

> **[User\_Manual\_MINI-ZBRBS\_EN\_V1.0.pdf](https://cdn.shopify.com/s/files/1/0742/9963/8001/files/User_Manual_MINI-ZBRBS_EN_V1.0.pdf?v=1756981719&ref=2301&sub_id=sonoff)**
>
> 7.19 MB

---

<div class="post-metadata">

**Author:** ![the\_shadow](https://forum.cpha.pt/user_avatar/forum.cpha.pt/the_shadow/32/8068_2.png) [@the\_shadow](https://forum.cpha.pt/u/the_shadow)\
**Post date:** [9 Fevereiro , 2026 12:17 UTC](https://forum.cpha.pt/t/sonoff-mini-zrbs/15541/3 "2026-02-09T12:17:38Z")

</div>

boas. Penso que já tentei isso e ele nao fez nada… vou tentar quando tiver mais tempo!  
Obrigado