# Cameras com integração directa no Home Assistant
**URL:** https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31
**Category:** Hardware
**Created:** [1 Abril , 2018 22:44 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31 "2018-04-01T22:44:14Z")
**Posts on this page:** 20
**Page:** 10
### Author:  [@FSousa](https://forum.cpha.pt/u/FSousa)
#### Post date: [22 Abril , 2020 23:57 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/189 "2020-04-22T23:57:46Z")
@pedrocampos No `host:` é só o IP da camara… Não é para colocares a porta RTSP `:554`
Nesse ficheiro onde estás a adicionar a camara, só podes ter uma vez `camera:` e depois as várias camaras de seguida nesse ficheiro… Não é para colocar `camera:` sempre que se adiciona uma camera…
Tens que reiniciar o Home Assistant depois de gravares o ficheiro. Verifica antes se te dá algum erro de configuração.
Eu tenho essa camara e funciona sem problemas da forma que estou a descrever.
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [23 Abril , 2020 09:39 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/190 "2020-04-23T09:39:19Z")
tenho estes erros no LOG…
```auto
2020-04-23 10:03:36 WARNING (MainThread) [homeassistant.components.onvif.camera] Couldn't connect to camera 'Frente', but will retry later. Error: Cannot connect to host 192.168.xx.xx:8000 ssl:None [Connect call failed ('192.168.xx.xx', 8000)]
2020-04-23 10:03:36 WARNING (MainThread) [homeassistant.components.camera] Platform onvif not ready yet. Retrying in 30 seconds.
2020-04-23 10:03:39 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for shelly which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant.
2020-04-23 10:04:10 WARNING (MainThread) [homeassistant.components.onvif.camera] Couldn't connect to camera 'Frente', but will retry later. Error: Cannot connect to host 192.168.xx.xx:8000 ssl:None [Connect call failed ('192.168.xx.xx', 8000)]
2020-04-23 10:04:10 WARNING (MainThread) [homeassistant.components.camera] Platform onvif not ready yet. Retrying in 60 seconds.
2020-04-23 10:05:14 WARNING (MainThread) [homeassistant.components.onvif.camera] Couldn't connect to camera 'Frente', but will retry later. Error: Cannot connect to host 192.168.xx.xx:8000 ssl:None [Connect call failed ('192.168.xx.xx', 8000)]
2020-04-23 10:05:14 WARNING (MainThread) [homeassistant.components.camera] Platform onvif not ready yet. Retrying in 90 seconds.
2020-04-23 10:06:48 WARNING (MainThread) [homeassistant.components.onvif.camera] Couldn't connect to camera 'Frente', but will retry later. Error: Cannot connect to host 192.168.xx.xx:8000 ssl:None [Connect call failed ('192.168.xx.xx', 8000)]
2020-04-23 10:06:48 WARNING (MainThread) [homeassistant.components.camera] Platform onvif not ready yet. Retrying in 120 seconds.
2020-04-23 10:08:52 WARNING (MainThread) [homeassistant.components.onvif.camera] Couldn't connect to camera 'Frente', but will retry later. Error: Cannot connect to host 192.168.xx.xx:8000 ssl:None [Connect call failed ('192.168.xx.xx', 8000)]
2020-04-23 10:08:52 WARNING (MainThread) [homeassistant.components.camera] Platform onvif not ready yet. Retrying in 150 seconds.
2020-04-23 10:11:26 WARNING (MainThread) [homeassistant.components.onvif.camera] Couldn't connect to camera 'Frente', but will retry later. Error: Cannot connect to host 192.168.xx.xx:8000 ssl:None [Connect call failed ('192.168.xx.xx', 8000)]
2020-04-23 10:11:26 WARNING (MainThread) [homeassistant.components.camera] Platform onvif not ready yet. Retrying in 180 seconds.
```
e este
`2020-04-23 17:24:09 ERROR (MainThread) [homeassistant.components.generic.camera] Error getting new camera image from Frente: Cannot connect to host 192.168.1.XXX:80 ssl:None [Connect call failed ('192.168.1.XXX', 80)]`
---
### Author:  [@RodolfoVieira](https://forum.cpha.pt/u/RodolfoVieira)
#### Post date: [23 Abril , 2020 16:15 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/191 "2020-04-23T16:15:33Z")
@pedrocampos por favor edita a mensagem do teu tópico anterior.
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [23 Abril , 2020 16:23 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/192 "2020-04-23T16:23:41Z")
peço desculpa nem reparei que pediram para editar
---
### Author:  [@blopes](https://forum.cpha.pt/u/blopes)
#### Post date: [23 Abril , 2020 22:37 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/193 "2020-04-23T22:37:44Z")
Boas,
Alguém já conseguiu integrar a imagem da camara numa Amazon Echo Show?
Tenho todos os equipamentos a funcionar sem problema, mas quando peço para mostrar a camara diz que o equipamento nao é compatível
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [24 Abril , 2020 07:14 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/194 "2020-04-24T07:14:14Z")
consegues decifrar os erros que me aparecem?
por mais configs que faça ha sempre alguma coisa…
---
### Author:  [@FSousa](https://forum.cpha.pt/u/FSousa)
#### Post date: [26 Abril , 2020 10:06 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/195 "2020-04-26T10:06:13Z")
@pedrocampos Coloca aqui o código yaml que estás a utilizar devidamente formatado.
Tens a certeza que estás a utilizar o IP correto da câmara?
Se colocares esse IP no browser consegues aceder às configurações da câmara?
Quando colocas aqui código com IPs internos da rede, como os 192.168.xxx.xxx não precisas estar a ocultar nada… Todos nós temos IPs desses ou parecidos na nossa rede e casa. O eu saber o IP interno que a tua câmara está a utilizar não vai fazer com que consiga aceder a ela a partir do exterior da tua rede.
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [26 Abril , 2020 10:54 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/196 "2020-04-26T10:54:11Z")
Sim tenho a certeza. Sim tanto o link rtsp funciona no VLC como no browser abre as definições da camara.
```auto
- platform: generic
still_image_url: http://192.168.1.65/cgi-bin/api.cgi?cmd=Snap&channel=0&rs=wuuPhkmUCeI9WG7C&user=admin&password=123456
stream_source: "rtsp://admin:123456@192.168.1.65:554/h264Preview_01_main"
```
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [27 Abril , 2020 09:50 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/197 "2020-04-27T09:50:29Z")
tenho isto no meu config, tentei usar todas as opções que encontrei…
instalei um programa no PC chamado iSpy por esses links rstp consigo entrar e pelo motion eye tambem da unresponsive host.
```auto
camera:
- platform: reolink_dev
host: 192.168.1.65
username: admin
password: 123456
name: Camara1
stream: main
protocol: rtsp
channel: 0
scan_interval: 5
- platform: onvif
name: camera2
host: 192.168.1.65
username: admin
password: 123456
port: 8000
- platform: generic
name: camera3
still_image_url: "https://192.168.1.65/cgi-bin/api.cgi?cmd=Snap&channel=0&rs=wuuPhkmUCeI9WG7C&user=admin&password=123456"
stream_source: "rtsp://admin:123456@192.168.1.65:554/h264Preview_01_main"
- platform: generic
name: camera4
still_image_url: "https://192.168.1.65/cgi-bin/api.cgi?cmd=Snap&channel=0&rs=wuuPhkmUCeI9WG7C&user=admin&password=123456"
stream_source: "rtmp://192.168.1.65:1935/bcs/channel0_main.bcs?token=[TOKEN]&channel=0&stream=0"
- platform: generic
name: camera5
still_image_url: "https://192.168.1.65/cgi-bin/api.cgi?cmd=Snap&channel=0&rs=wuuPhkmUCeI9WG7C&user=admin&password=123456"
stream_source: "rtmp://192.168.1.65/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=123456"
- platform: generic
name: camera6
still_image_url: "https://192.168.1.65/cgi-bin/api.cgi?cmd=Snap&channel=0&rs=wuuPhkmUCeI9WG7C&user=admin&password=123456"
stream_source: "rtmp://192.168.1.65/vod/Rec_20160707_040638_411_M.mp4?&channel=0&stream= 0&user=admin&password=123456"
```
e tenho estes erros nos logs
```auto
2020-04-27 10:43:37 ERROR (MainThread) [custom_components.reolink_dev.ReolinkPyPi.camera] Exception while calling Reolink camera API at ip 192.168.1.65
2020-04-27 10:43:37 ERROR (MainThread) [custom_components.reolink_dev.ReolinkPyPi.camera] Error translating login response to json
2020-04-27 10:43:40 WARNING (MainThread) [homeassistant.components.onvif.camera] Couldn't connect to camera 'camera2', but will retry later. Error: Cannot connect to host 192.168.1.65:8000 ssl:None [Connect call failed ('192.168.1.65', 8000)]
2020-04-27 10:44:30 ERROR (MainThread) [homeassistant.components.generic.camera] Error getting new camera image from camera3: Cannot connect to host 192.168.1.65:443 ssl:None [Connect call failed ('192.168.1.65', 443)]
2020-04-27 10:44:30 ERROR (MainThread) [homeassistant.components.generic.camera] Error getting new camera image from camera4: Cannot connect to host 192.168.1.65:443 ssl:None [Connect call failed ('192.168.1.65', 443)]
2020-04-27 10:44:30 ERROR (MainThread) [homeassistant.components.generic.camera] Error getting new camera image from camera5: Cannot connect to host 192.168.1.65:443 ssl:None [Connect call failed ('192.168.1.65', 443)]
2020-04-27 10:44:30 ERROR (MainThread) [homeassistant.components.generic.camera] Error getting new camera image from camera6: Cannot connect to host 192.168.1.65:443 ssl:None [Connect call failed ('192.168.1.65', 443)]
```
---
### Author:  [@rukako](https://forum.cpha.pt/u/rukako)
#### Post date: [27 Abril , 2020 13:12 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/198 "2020-04-27T13:12:30Z")
Esta camera Zosi 1080 p funciona bem com HA ?
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [3 Maio , 2020 08:31 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/199 "2020-05-03T08:31:11Z")
Alguém poderá ajudar?
---
### Author:  [@JSilva](https://forum.cpha.pt/u/JSilva)
#### Post date: [3 Maio , 2020 11:55 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/200 "2020-05-03T11:55:04Z")
Não sei se no teu caso ajuda, mas eu tive que alterar os codecs das minhas câmaras Hikvision de H.265 para H.264
Estão com esta configuração:
```auto
- platform: ffmpeg
name: Entrada
input: -rtsp_transport tcp -i rtsp://user:pass@ip_da_camara/Streaming/Channels/101
```
---
### Author:  [@JSilva](https://forum.cpha.pt/u/JSilva)
#### Post date: [3 Maio , 2020 12:12 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/201 "2020-05-03T12:12:56Z")
Também me parece que a tua formatação não está correta (espaçamento).
Tenta colocar assim:
```auto
camera:
- platform: reolink_dev
host: 192.168.1.65
username: admin
password: 123456
name: Camara1
stream: main
protocol: rtsp
channel: 0
scan_interval: 5
```
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [4 Maio , 2020 07:40 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/202 "2020-05-04T07:40:06Z")
os da Reolink sao H.264…esta config nao funciona tambem…
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [4 Maio , 2020 07:41 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/203 "2020-05-04T07:41:19Z")
penso que estava tudo ok mas copiei a tua formatação e nada.
---
### Author:  [@JSilva](https://forum.cpha.pt/u/JSilva)
#### Post date: [4 Maio , 2020 13:13 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/204 "2020-05-04T13:13:01Z")
Tenta assim:
```auto
ffmpeg:
camera:
- platform: ffmpeg
name: Frente
input: rtsp://admin:123456@192.168.1.65:554/h264Preview_01_main
```
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [4 Maio , 2020 14:10 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/205 "2020-05-04T14:10:40Z")
Da-me estes error no Log
```auto
2020-05-04 14:55:02 ERROR (stream_worker) [libav.tcp] Port missing in uri
2020-05-04 14:55:05 ERROR (stream_worker) [libav.tcp] Connection to tcp://192.168.1.65:554?timeout=5000000 failed: Host is unreachable
2020-05-04 14:55:30 ERROR (stream_worker) [libav.tcp] Connection to tcp://192.168.1.65:554?timeout=5000000 failed: Host is unreachable
2020-05-04 14:55:33 ERROR (stream_worker) [libav.tcp] Connection to tcp://192.168.1.65:554?timeout=5000000 failed: Host is unreachable
2020-05-04 14:55:35 WARNING (Poll) [pyShelly] Error, 401 Unauthorized
2020-05-04 14:55:46 WARNING (Thread-42) [pyShelly] Error, 401 Unauthorized
2020-05-04 14:55:50 ERROR (stream_worker) [libav.tcp] Connection to tcp://192.168.1.65:554?timeout=5000000 failed: Host is unreachable
```
---
### Author:  [@JSilva](https://forum.cpha.pt/u/JSilva)
#### Post date: [4 Maio , 2020 14:24 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/206 "2020-05-04T14:24:56Z")
Como não conheço essa câmara, não te consigo ajudar.
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [4 Maio , 2020 14:30 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/207 "2020-05-04T14:30:01Z")
Pois obrigado
O mais estranho disto tudo é acesso pelo browser e pelo VLC funciona.
---
### Author:  [@pedrocampos](https://forum.cpha.pt/u/pedrocampos)
#### Post date: [5 Maio , 2020 16:35 UTC](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31/208 "2020-05-05T16:35:23Z")
Instalei agora uma app na TV (ip cam viewer), escolhi onvif e funciona perfeitamente
[Página anterior](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31.md?page=9)
[Próxima página](https://forum.cpha.pt/t/cameras-com-integracao-directa-no-home-assistant/31.md?page=11)